Setting General Preferences And Savings Preferences; Load A Roll Of Thermal Paper - Verathon BladderScan BVI 9400 User Manual

®
BladderScan BVI 9400

Setting General Preferences and Savings Preferences

NOTE: See page 42 for information about setting General Preferences, Savings
Preferences, and Self-Test Options.
General Preferences, Savings Preferences, and Self-Test Options can be accessed from
the Settings screen.
General preferences include options for: Language, Date Format, Time Format, Time
Zone, and Calibration Warning.
Savings Preferences include: UTI Rate, UTI Cost, Catheterization Cost, Catheterization
Volume, Currency, and Savings Calculation.

Load a Roll of Thermal Paper

To load a new roll of thermal paper:
1. Open the paper compartment door (located on the base of the Console, under the
display).
2. Slide the door to the right, then lift the printer door up.
3. Insert the end of a new paper roll with the thermal side down, into the paper slot.
To verify which side is the thermal side, scratch the paper with your finger nail. If a
black mark appears, this is the thermal side.
4. Extend the end of the paper past the end of the unit.
5. Rotate the printer door down. Make sure you hear it snap into place.
6. Slide the printer door to the left.
7. Tear the excess paper off.
CAUTION!
to a point.
NOTE: If the paper appears to be stuck in the printer, contact your authorized
BladderScan
Customer Care at 1.800.331.2313 for service.
User's Manual
To avoid paper jams, never fold the end of the paper roll or cut it diagonally or
®
Service Center, your local BladderScan
Getting Started
®
distributor, or Verathon Medical
®
page 27