Table of Contents
Advertisement
Available languages
Available languages
Overview
#
Description
1
<POWER>
2
<Wireless Reset>
3
Power Indicator LED
4
Indicator LEDs
5
DMX In
Mini USB
6
Power In
Setting Up Products with WELL Com
The WELL Com is ready to use straight out of the box.
To configure your products with WELL Com you must perform the following steps:
1.
Connect WELL Com to power.
2.
Turn on Wi-Fi™ on your mobile device.
Note: If you have not already done so, download and install the WELL Com app onto your mobile device.
3.
Go to the Wi-Fi™ settings on your mobile device and connect to WELL Com's default Wi-Fi™ (SSID) WIFI-
WELL COM. To avoid interference with other wireless signals in the immediate area, manually select the Wi-
Fi™ channel <CH02> to <CH11> on the WELL Com within the app settings.
4.
Set your products to receive signal input from WELL Com. For details, refer to the User Manuals for the products
in your setup.
a.
Set products to receive signals on the same channel as was set on WELL Com in the previous step.
b.
Set products to their most basic DMX personality.
Note: Make sure the DMX starting address is set to 001.
WELL Com QRG Rev. 1
QUICK REFERENCE GUIDE
2
5
Press to power on/off the device.
Press to reset wireless fixture pairing.
Green - Power is currently 50-100%
Orange (Red + Green) - Power is currently 20-50%
Red - Power is currently < 20%
Orange - Will blink for 5s once Wireless Reset is pressed and then
pair with fixtures. Blinks intermittently while connected.
WIRELESS
Blue - Solid means WELL Com is receiving WiFi signal. Blinking
means there is no WiFi detected.
Red - Solid means WELL Com is receiving DMX signal. Blinking
DMX
means there is no DMX signal detected.
5-pin XLR DMX-in adapter is included.
Used for charging. Use the included external power supply. USB-A male to Micro
USB-B male is included.
Battery Charge Time: 8 hours
Battery Life: 8 hours
6
4
3
Function
1
Blinking
when
charging
EN
2
Advertisement
Table of Contents
