O (Obey Copyright Rules-Oscillator); P (Pattern-Program); R (Rear Sample-Root) - Korg kronos Operation Manual

Appendices
No unused WAVE files found
Meaning: When you executed the Disk Utility page menu
command Delete Unused WAVE files, no unused WAVE
files were found.
O (Obey copyright rules–Oscillator)
Obey Copyright Rules
Meaning: When you execute the Disk mode Make Audio
CD page Write to CD command, or when you execute
Destination in the Sampling mode Audio CD page
Destination command.
Please read "COPYRIGHT WARNING" on page 3 of the
Quick Start Guide before you use this data.
P (Pattern–Program)
Pattern conflicts with events
Meaning: It was not possible to execute the Bounce
operation because one of the tracks contained a pattern, and
the same measure of the other track contained events or a
pattern.
• Open the pattern.
Pattern exists across destination to-end-
of-measure or source from-measure
Meaning: When moving a measure, the edit operation could
not be executed because a pattern had been put in the
destination end measure or the source start measure, and had
not been opened.
• Open the pattern.
Pattern exists in destination or source
track - Open pattern?
Meaning: A pattern has been placed in the track that you
specified as a destination or source for editing. If you wish to
open the pattern and execute (the events of the pattern will
be copied), press the OK button. If you wish to execute
without opening the pattern, press the Cancel button.
R (Rear sample–Root)
Rear sample is empty
Meaning: When you executed Link in the Sampling mode
Sample Edit page, the sample that you specified as the rear
sample is empty.
• Specify a sample that contains data as the rear sample,
and execute once again.
276
Oscillator Mode conflicts (Check PROG
P1)
Meaning: In Sampling mode when you executed Convert
MS To Program with Use Destination Program Parameters
checked, the conversion destination program Oscillator
Mode setting did not match.
• In Program mode, set the Oscillator Mode of the
conversion destination program. If converting a
monaural multisample, select Single. If converting a
stereo multisample, select Double.
Pattern used in song - Continue?
Meaning: When editing, the specified pattern has been
placed in a track. If you wish to execute, press the OK
button. If you decide not to execute, press the Cancel button.
Program Bank Type conflicts
Meaning: When receiving a dump of an individual bank or a
single program, the KRONOS received a program that did
not match the bank type. If the bank type does not match, the
program will not be received.
Meaning: When receiving an All Programs dump, the
KRONOS received a bank whose bank type did not match.
Only banks of the matching bank type will be received.
• Use the Set Program Bank Type command (on the
Global P0 Basic Setup page) to change the bank type so
that it's the same as the one being transmitted, and then
try the operation again.
Program Type conflicts
Meaning: This message will appear when you execute Copy
Tone Adjust if the copy-source and copy-destination
program types are different. You cannot copy between HD-1
and EXi Programs, or between different types of EXi
Programs.
Root directory is full
Meaning: You attempted to create a file or directory in the
root directory of the media, but this would exceed the
maximum number of root directory entries.