Korg kronos Operation Manual page 242

Using KARMA
If you turn "Solo" On (checked), only that KARMA module
will sound. This is useful when you are selecting a GE, or
when you want to audition the phrase that a module is
generating.
Modules whose "Solo" is On (checked) will sound even if
"Run" is Off (unchecked).
The "Solo" setting is cleared when you switch to another
combination. It is not saved when you write the
combination.
KARMA module A will sound.
KARMA module B will sound.
KARMA modules A and B will sound.
Note: If " " is not shown in the display, "Run" has
been assigned as a performance realtime performance. The
KARMA SWITCHES etc. will control "RUN."
KARMA module MIDI I/O channel
settings
The MIDI input/output channel setting for each KARMA
module and the MIDI channel setting of each timbre
together determine how the KARMA modules will play the
timbres.
If a KARMA module's MIDI output channel matches the
MIDI channel of a timbre, the phrase or pattern generated by
that KARMA module (if it's operating) will play that timbre.
For details on making these settings, see "Editing KARMA
in Combination mode" on page 239 and "7–1c: MIDI I/O"
on page 475 of the Parameter Guide.
GE (Generated Effect) selection
Just as for a program, you can use the "GE Select" field to
select the GE used by each module. (See "Editing KARMA
in Combination mode" on page 239)
KARMA module parameter settings
For details on editing KARMA module parameters, see
"Editing KARMA in Combination mode" on page 239.
234