Korg kronos Operation Manual page 163

Sampling and editing in Sampling mode Saving, converting to Programs, and Comparing
3. Press the text edit button to open the text edit dialog
box, and input a new program name (up to 24
characters). By default, this will be the name of the
multisample.
4. Enable or disable "Use Destination Program
Parameters" as desired.
Use Destination Program Parameters unchecked:
When you execute the command, the multisample of the
destination Program will be replaced by the multisample
you select here, and the other Program parameters will be
initialized so that it reproduces the sound heard in
Sampling mode.
The program will be converted with an Oscillator Mode
(Program 1–1a) of Single.
Use Destination Program Parameters checked:
When you execute the command, the multisample of the
conversion-destination program will be replaced by the
multisample you select here, but the other program
parameters will not be initialized. Choose this if you want
to use the parameter settings of an existing program.
If you check Use Destination Program Parameters,
please be aware of the following point.
The destination program's Oscillator Mode must be
Single. If this is not the case, the message "Oscillator
Mode conflicts" will appear when you attempt to execute
the command. To solve this, change the Oscillator Mode
setting of the destination Program.
5. Use the To "Program" field to specify the conversion-
destination program.
We recommend that you use Program banks USER-G or
AA...GG for saving Programs created in Sampling
mode.
6. Press the OK button to execute.
7. Press the PROG button to enter Program mode, select
the converted program, and try it out.
Compare
In Sampling mode, there is no Compare function that lets
you return to the state prior to editing.
If you want to preserve the state prior to editing, use a
function such as Copy Sample or Copy MS to copy the
multisample or sample before you begin editing. For more
information, see "Copy Sample" on page 728 of the
Parameter Guide, and "Copy MS (Copy Multisample)" on
page 730 of the Parameter Guide.
In some of the page menu commands on the Sample Edit and
Loop Edit pages, you can execute with the Overwrite option
unchecked in the dialog box, so that the sample data prior to
editing will be preserved.
155