Korg kronos Operation Manual page 239

3. Use the front panel SCENE 1–8 switches to choose a
scene.
The sliders and switches will change to the settings that were
saved in the scene you chose.
Each of the eight scenes contains the values of sliders 1–8
and switches 1–8. By pressing a SCENE 1–8 switch to
choose a scene, you can instantly recall settings for the eight
sliders and eight switches.
Even if you switch scenes, the changes you make using
sliders 1–8 and switches 1–8 are remembered until you
select another program. When you write a program, your
slider and switch settings are saved in the respective scene
1–8.
Restoring the state of the sliders and switches
You can do this by adjusting the controls while you watch
the sliders and switches in the screen, or you can use the
following method.
Restoring the entire program
1. Press the COMPARE switch.
The entire program will revert to the state in which it was
written. (See "Using COMPARE" on page 46.)
2. Press the COMPARE switch once again.
The program will return to the edited state.
Restoring all sliders and switches of the selected
scene
1. Operate the sliders and switches to edit the values
saved in the program.
The LED of the selected SCENE switch will blink.
2. Hold down the RESET CONTROLS switch, and
press the SCENE switch.
All sliders and switches will be reset to their stored settings,
and the SCENE switch LED will light.
3. Once again, hold down the RESET CONTROLS
switch and press the SCENE switch.
All sliders and switches will return to the edited state of step
1, and the SCENE switch LED will blink.
Restoring a single slider or switch
1. Operate the sliders and switches to edit the values
saved in the program.
2. Hold down the RESET CONTROLS switch, and
operate the slider or switch that you want to restore.
The selected slider or switch will return to its stored setting.
Restoring all scene settings
1. In each scene, operate the sliders and switches to edit
the values saved in the program.
2. Hold down the RESET CONTROLS switch, and
press the MODULE CONTROL switch.
All scenes will return to their stored settings.
If you've used the RESET CONTROLS switch to return
all scenes to their original setting, there is no way to
return to the edited settings of step 1.
Resetting the REALTIME CONTROL knob settings for all
scenes
1. Use the REALTIME CONTROL knobs to edit the
sound of the program, and use the sliders and
switches to modify the saved settings in each scene.
Performing with KARMA Performing with KARMA in Program mode
2. Hold down the RESET CONTROLS switch, and
press the CONTROL ASSIGN RT KNOBS/KARMA
switch.
The Real-Time Controls knob settings will be reset (to the
center value of 064), and the settings of all scenes will return
to their stored settings.
If you've used the RESET CONTROLS switch to reset
the Real-Time Controls knobs and to return all scenes to
their saved setting, there is no way to return to the edited
settings of step 1.
Selecting a GE (Generated Effect)
When KARMA is on, the KARMA module uses a GE to
generate phrases or patterns. The KRONOS provides a wide
range of GEs that you can use for a variety of instruments,
playing techniques, and musical styles (See "The structure of
KARMA" on page 225).
For each of the pre-loaded programs, a GE that's appropriate
for the sound of the program is already selected. If you
switch to a different GE, the generated phrase or pattern will
change dramatically.
1. Go to the Program P0: Play– KARMA GE page.
2. In the display, press the "GE Select" popup button to
open the "GE Select" menu.
3. Select a GE from the list in the right side of the
display.
The selected GE will be highlighted and will become active.
If you now play the keyboard, this GE will generate a phrase
or pattern.
While this menu is displayed, you can select and play these
GEs without pressing the OK button.
231