Backlight Time; Hide Display; Key Beeps; Select Language - Rosslare HLX-40 Installation And Programming Manual

Installer Menu
6.4.21

Backlight Time

Specifies the backlight options; by default, the backlight time is set to 15
seconds.
To set the backlight:
1. Using Menu, select one of the following options:
Always: to specify that the keypad and buttons are backlit at all

times.
15 secs: to specify that the keypad and buttons are backlit for up to

15 seconds after last key press.
Press Enter to confirm.
2.
6.4.22

Hide Display

Enables you to specify that when armed, the system does not display the
system statuses or other system prompts; by default,
To display the sy stem status:
Using Menu, select one of the following options:
1.
Off to display status and prompts.

On to hide status and prompts.

Press Enter to confirm.
2.
6.4.23

Key Beeps

Choose to turn key beeps on to hear a beep on each key press; key beeps is on
by default.
To set the key beeps:
1. Using Menu, select one of the following options:
 On to turn the key beeps on
Off to turn the key beeps off

Press Enter to confirm.
2.
6.4.24

Select Language

The HLX-40 supports multiple languages for both the textual messages and
audio feedback. Choose the system language of your choice; by default the
language is set to English.
Please note that for Greek, the display shows the Greek language in Latin
characters; however, the audio feedback is in Greek.
To set the sy stem language:
Using Menu, select one of the following languages:
1.
English, Spanish, Italian, Portuguese, Greek, German

Press Enter to confirm.
2.
HLX-40 Hardware Installation and Programming Manual
Hide Display
is off.
43