Photometric Chart - ADJ COB CannOn Wash DW User Instructions

The ADJ RFC remote (sold seperately) has many different functions and allows you to control your COB Cannon
Wash DW from long distance. The ADJ RFC remote can control your system up to 150 ft. To use the RFC you
must first activate the fixtures receiver, to activate the receiver please see the instructions on page 10.
BLACkOUT - Pressing this button will blackout the fixture. Press this button for more then 3 seconds to activate
default mode. All modes will return to their default settings.
AUTO RUN - This button lets you cycle through color fade mode, color change mode, and auto run mode. Each
press of the button will change to the next mode. Color fade mode and color change mode have 8 different
programs. You can use the "+" and "-" buttons to cycle through the 8 programs. You can control the speeds of
each mode by pressing the SPEED button and then using the "+" and "-" buttons to adjust the speed.
SELECTION PROGRAM - Press this button to activate Static Color mode. Use the "+" and "-" buttons to scroll
through the 8 colors. Once you have found your desired color press the FLASH button to activate strobing. Use
the "+" and "-" buttons adjust the strobe speed.
FLASH - This button will activate the flash (strobe) effect. You can control the flash speed by pressing the "+"
and "-" buttons.
SPEED - Press this button and use the "+" & "-" buttons to adjust the speed of the color fade mode, color change
mode, and auto run.
SOUND ACTIVE - This button activates sound active mode. Use the "+" & "-" buttons to scroll through the 8
sound active modes. Press the SOUND ACTIVE button again to access sound sensitivity adjustment. Use the
"+" & "-" buttons to adjust the sound sensitivity level.
R G - Press the "R" button to access Warm White or "G" to access Cold White. Use the "+" or "-" to adjust the
brightness. Press the Flash button to activate strobing and use the "+" or "-" buttons to adjust the strobe speed.
"+" and "-" - These buttons are used to adjust the flash rate, auto run speed, color fade speed, color change
speed, sound sensitivity, and output intensity. These buttons are also used to scroll through the static colors,
color fade modes, color change modes, and sound active modes.

PHOTOMETRIC CHART

ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 12