Table of Contents
Advertisement
The COB Cannon Wash DW comes with a 80 degree lens already attached. Included in the box are optional 40
& 50 degree lenses. To switch lenses simply remove the retainer ring located in front front of the current lens.
After the retainer ring has been removed carefully remove the lens, and attach your desired lens. Reinstall the
retainer ring and the switch is complete. When reinstalling the retainer ring, make sure to insert 3 points of the
retainer ring into the 3 notches located around the inside of the lens frame.
DIMMER CURVE CHART
Dimmer
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
POWER CORD DAISY CHAIN
With this feature you can connect the fixtures to one another using the PowerCON input and output
sockets. The quantity that can be connected is 5 fixtures maximum. After 5 fixtures you will need to use
a new power outlet. They must be the same fixtures. DO NOT mix fixtures.
FUSE REPLACEMENT
Disconnect the unit from its power source. Remove the power cord from the unit. Once the cord has been
removed, the fuse holder is located under the powerCON connection. Use a phillips head screwdriver to remove
the fuse holder. Remove the fuse located inside the fuse holder and replace with the new fuse. Install the fuse
holder and new fuse and secure it.
TROUBLE SHOOTING
(FadeTime)
0S
T rise (ms)
0
780
1180
1380
1580
ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 14
Tdown (ms)
T rise (ms)
0
1100
1520
1730
1940
1S (FadeTime}
Tdown (ms)
0
0
1540
1660
1860
1940
2040
2120
2230
2280
Advertisement
Table of Contents
