Advertisement
H2O IR
The UC IR infrared remote gives you control of various functions
(See below). To control the fixture you must aim the remote at the
front of the fixture and be no more then 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - This button is invalid for the fixture.
FADE/GOBO - Press this button to run or stop the effect wheel.
"DIMMER +" and "DIMMER -" - These buttons adjust the output in-
tensity.
STROBE - This button is invalid for the fixture.
COLOR - Press this button to rotate or stop the color wheel.
1-9 - These buttons are invalid for this fixture.
SOUND ON & OFF - These buttons are invalid for this fixture.
SHOW 0 - This button is invalid for this fixture.
H2O IR
1900
2320
0
1.0
Distance(m)
ADJ Products, LLC - www.adj.com - H2O IR Instruction Manual Page 6
ADJ UC IR Control
Photometric Chart
905
485
280
930
505
290
2.0
3.0
4.0
H2O IR
143
186
5.0
ADJ Products, LLC - www.adj.com - H2O IR Instruction Manual Page 7
34 Degree Lens Install
The install of the 34 Degree lens
is a pretty easy process. Please
be very carefull when doing this
install.
Unscrew and remove the focus
lens. Using your thumb, gently
push the lens outward until it
"pops" out.
When the lens "pops" out, the pic-
ture to the left is what you should
see. Remove the lens and retainer
ring.
Flip the focus lens barrel over and
insert the lens. Carefully insert the
retainer ring. Please do this very
carefully. Make sure retainer ring is
in correctly, flesh against the lens.
Now you can screw the focus lens
back into the H2O IR.
Advertisement
