ADJ COB CannOn Wash DW User Instructions page 9

2. When "h.XXX" is displayed you are in Warm White dimming mode. Press the UP and DOWN buttons to adjust
intensity.
3. When "C.XXX" is displayed you are in Cool White dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. After you have adjusted the warm & cool colors to make your desired color you can then activate strobing by
pressing the SET UP button to enter the Flash (strobe) mode.
5. "FS.XX" will be displayed, this is Flash mode. The Flash can be adjusted between "FS.00" (flash off) to "FS.15"
(fastest flash).
Sound Active Mode:
In this mode the COB Cannon Wash DW will react to sound, and chase through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is dis- played. "XX" represents the sound active
mode (1-8) currently displayed.
2. The fixture will now change via sound.
3. Press the SET UP button to adjust the sound sensitivity. "SJ-X" should be displayed. Use the UP or DOWN
buttons to adjust the sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the highest.
Auto Run Mode:
There are 3 types of Auto Run Modes to choose from; Color Fade, Color Change, and both modes running
together. The running speed is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX", "AJXX", or "A-JF" is displayed.
• AFXX = Color Fade mode, there are 8 Color Fade modes to choose from. Use the UP or DOWN buttons to
scroll through the different Auto Fade modes.
• AJXX = Color Change mode, there are 8 Color Change modes to choose from. Use the UP or DOWN buttons
to scroll through the different Auto Change modes.
• A-JF = Both Color Fade and Color Change modes running.
2. After you have chosen your desired running mode press the SET UP button until "SP.XX" is displayed. When
this is displayed you can adjust the running speed of your desired program. Use the UP or DOWN button to
adjust the speed between "SP.01" (slowest) and "SP.16" (fastest). Once you have set your desired running
speed, press the SET UP button to return to your desired Auto Run Mode.
Static Color Mode:
1. Plug the fixture in and press the MODE button until "CLXX" is displayed.
2. There are 8 colors to choose from. Select your desired color by pressing the UP and DOWN buttons. After
you have selected your desired color you can activate strobing by pressing the SET UP button to enter the Flash
(strobe) mode.
3. "FS.XX" will be displayed, this is Flash mode. The Flash can be adjusted between "FS.00" (flash off) to "FS.15"
(fastest flash).
DMX Mode:
Operating through a DMX controller gives the user the freedom to create their own programs tailored to their
own individual needs. The COB Cannon Wash DW has 6 DMX modes: 1 channel mode, 2 channel mode, 3
channel mode, 4 channel mode, 5 channel mode, and a 6 channel mode. See pages 7-8 for each mode's DMX
traits.
1. This function will allow you to control each individual fixture's traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until "d.XXX" is displayed. "XXX" represents the
current displayed DMX address. Use the UP or DOWN buttons to select your desired DMX address, then press
the SETUP button to select your DMX Channel mode.
3. Use the UP or DOWN buttons to scroll through the DMX Channel modes. The Channel modes are listed
below:
• To run the 1 Channel Mode, press the MODE button until "Ch01" is displayed.
This is the 1 Channel DMX Mode.
OPERATING INSTRUCTIONS (continued)
• To run the 2 Channel Mode, press the MODE button until "Ch02" is displayed.
This is the 2 Channel DMX Mode.
• To run the 3 Channel Mode, press the MODE button until "Ch03" is displayed.
ADJ Products, LLC - www.adj.com COB Cannon Wash DW User Manual Page 9