Removing The Ccd - Clevo W540EU Service Manual

Removing the CCD

1. Turn off the computer, turn it over, and remove the battery
2. Carefully remove the rubber screw covers
3. Run your fingers around the inner frame of the LCD panel at the points as indicated by the arrows
4. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Push the LCD front
cover upwards before carefully lifting it up.
13
5. Remove the LCD front cover
a.
1
5
4
8
b.
11
10
9
(page 2 -
- and screws
1 4
(Figure 15c).
13
c.
2
6
3
7
d.
12
12).
- from the front cover (Figure
5 8
13
13
Disassembly
Figure 15
CCD Removal
15a).
a. Carefully remove
- .
9 12
rubber screw covers and
screws from the front
cover.
k. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrows.
l. Lay the computer down
on a flat surface with the
top case up forming a 90
degree angle. Push the
LCD front panel upwards
before carefully lifting it
up.
d. Remove the LCD front
cover.

13. LCD Front Cover
• 4 Screws
Removing the CCD 2 - 19
the