Removing The Ccd Module - Clevo W517GU Service Manual

Removing the CCD Module

1. Turn off the computer, remove the battery
2. Turn the computer over, run your fingers around the inner frame of the LCD panel at the points indicated by the
arrows - (Figure 10a ) .
1 4
3. Carefully remove the LCD panel cover
4. Disconnect the cable (Figure
6
5. Remove the CCD module
7
a.
1
2
4
b.
(page 2 - 5).
off (Figure 10b).
5
10c).
off (Figure 10d).
c.
3
d.
5
CCD Module
a. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrow.
b. Remove the LCD panel
cover.
c. Disconnect the cable.
d. Remove the CCD mod-
ule.
6
7
5. LCD Front Panel
Cover
7. CCD Module
Removing the CCD Module 2 - 15
Disassembly
Figure 10
Removal
