Removing The Ccd - Clevo P955ER Service Manual

Removing the CCD

1. Turn off the computer, turn it over to remove the battery
2. Lay the computer down on a flat surface with the top case up forming a 130 degree angle. Carefully remove the
mylar covers - and screws
1 2
3. Run your fingers around the inner frame of the LCD panel to lift at points
slightly lift up the outer frame at point
inner frame at the lower point
4. Remove the LCD front cover
a.
3
1
b.
(page 2 -
- .
3 4
as indicated by the arrows, and then run your fingers again around the
7
as indicated by the arrows (Figure
8
(Figure 10b).
5
4
2
9
6).
- as indicated by the arrows, and
5 6
10a).
6
7
8
Disassembly
Figure 10
CCD Removal
a. Remove rubber
screws and then careful-
ly release the
frame of the LCD panel
at the points indicated by
the arrows.
b. Remove the LCD front
cover.
5

9. LCD Front Cover
• 2 Screws
Removing the CCD 2 - 15
and
inner