Removing The System Memory (Ram) - Clevo W540EU Service Manual

Disassembly

Removing the System Memory (RAM)

Figure 6
RAM Module
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDRIII (DDR3) Up to 1066/1333 MHz. The main memory can be expanded up to 8GB. The SO-DIMM modules sup-
ported are 1024MB and 2048MB DDRIII Modules. The total memory size is automatically detected by the POST rou-
a. Remove the screws
tine once you turn on your computer.
from the component
bay cover.
Memory Upgrade Process
b. Remove the compo-
nent bay cover. The
1. Turn off the computer, turn it over, and remove the battery
RAM modules will be
2. Remove screws
visible at point 6 on
3. Carefully lift up the bay cover
the mainboard.
4. The RAM modules will be visible at point
a.

Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.

5. Component Bay Cov-
er
• 4 Screws
2 - 10 Removing the System Memory (RAM)
- from the component bay cover
1 4
.
5
on the mainboard
6
b.
1
2
3
4
(page 2 - 5).
(Figure 6a).
)
(Figure 6b .
6
5