Removing The 3.75G Module - Clevo W540EU Service Manual

Disassembly

Removing the 3.75G Module

Figure 14
3G Module Removal
1. Turn off the computer, turn it over, remove the battery
2. The 3.75G module will be visible at point
a. Locate the 3.75G mod-
3. Carefully remove the screw
ule.
4. The 3.75G module
b. Remove the screw.
c. The module will pop-up.
d. Remove the 3.75G mod-
ule.
a.
b.

3. 3.75G Module
• 1 Screw
2 - 18 Removing the 3.75G Module
(Figure
2
(Figure 14c) will pop-up, and you can remove it from the computer
3
1
a.
The power button cable is underneath the 3G
module. When disassembling the mainboard,
the power button cable must be disconnect-
ed.
2
(page 2 - 12) and the component bay cover
on the mainboard (Figure 14a).
1
14b) .
c.
3

Power Button Cable
(page 2 - 10).
(Figure 14d).
d.
3