Table of Contents
Advertisement
Disassembly
Removing the System Memory (RAM)
Figure 4
RAM Module
The computer has one memory sockets for 262 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDR5 5600MHz. The main memory can be expanded up to 64GB. The total memory size is automatically detected by
the POST routine once you turn on your computer.
a. The RAM modules will
be visible at point
1
Memory Upgrade Process
on the mainboard.
b. Pull the release lat-
1. Turn off the computer, turn it over to remove the bottom case
ches.
2. The RAM modules will be visible at point
c. Remove the module.
3. Gently pull the two release latches (
arrows
4. The RAM module
Contact Warning
Be careful not to touch
the metal pins on the
module's
connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.
4. RAM Module
2 - 8 Removing the System Memory (RAM)
&
2
(Figure
4b).
will pop-up
(
4
Figure 4c
a.
1
b.
2
3
2
(page 2 -
5).
on the mainboard
(Figure 4b
)
.
1
) on the sides of the memory socket in the direction indicated by the
3
)
, and you can then remove it
.
c.
1
3
4
Advertisement
Table of Contents
