Removing The System Memory (Ram) - Clevo N250GU Service Manual

Disassembly

Removing the System Memory (RAM)

Figure 4
RAM Module
The computer has two memory sockets for 260 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
Removal
DDR4 Up to 2133 MHz. The main memory can be expanded up to 32GB. The total memory size is automatically detect-
ed by the POST routine once you turn on your computer.
a. The RAM modules will
be visible at point 1
on the mainboard.
Memory Upgrade Process
b. Pull the release lat-
1. Turn off the computer, turn it over to remove the battery
ches.
2. The RAM modules will be visible at point
c. Remove the module.
3. Gently pull the two release latches (
arrows
4. The RAM module
a.

Contact Warning
Be careful not to touch
the metal pins on the
module's connecting
edge. Even the cleanest
hands have oils which
can attract particles, and
degrade the module's
performance.

Single Memory Module Installation
4. RAM Module
If your computer has a single memory
module, then insert the module into the
Channel 0 (JDIMM1 / RAM1) socket.
2 - 8 Removing the System Memory (RAM)
&
2
(Figure 4b).
(
will pop-up Figure 4c
4
b.
1
1

(page 2 - 5) and bottom cover
)
on the mainboard (Figure 4b .
1
) on the sides of the memory socket in the direction indicated by the
3
)
, and you can then remove it
.
2
3
2
3
(page 2 - 6).
c.
4