Table of Contents
Advertisement
Chapter 3
[1]
[2]
3.4.4 Cassette Separation Pad
3.4.4.1 Removing the Separation Pad
LBP3100 / LBP3010B
1) Remove the separation pad [1].
- 2 screws [2]
[1]
3.4.4.2 Removing the Separation Pad
LBP6000 / LBP6000B
1) Remove the Separation Pad [1].
- 2 Screws [2]
[1]
3-34
[2]
F-3-108
[2]
F-3-109
3.5 FIXING SYSTEM
3.5.1 Fixing Unit
3.5.1.1 Preparation for Removing the Fixing Unit
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-3)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-2)Reference[Removing the Right
Cover]
4) Removing the Rear Cover (page 3-1)Reference[Removing the Rear
Cover]
5) Removing the Main Controller PCB (page 3-17)Reference[Removing
the Main Controller PCB]
3.5.1.2 Removing the Fixing Unit
LBP3100 / LBP3010B
1) Remove the inner rear cover [1].
- 1 screw [2]
[2]
0019-3053
2) Remove the terminal [1] and free the harness [3] from the harness guide
[2].
0025-1245
[1]
3) Disconnect the 4 connecters [1].
4) Free the harness [3] from the harness guide [2].
5) Free the fixing harness [5] from the harness holder [4].
[1]
F-3-110
[2]
[3]
F-3-111
0019-4275
0019-4276
Advertisement
Table of Contents
