Front Cover; Preparation For Removing The; Removing The; Before Remove The - Canon LBP6000 Series Service Manual

Chapter 3
Points to Note at Installation
- Be sure to fit the 2 Fixing Pressure Arms (Right and Left) [2] into the 2
holes (right and left) [1] of the Delivery Tray.
- Be sure to set the Cartridge Lock Arm [4] to the arm unit [3] on the
Delivery Tray.
[2]

3.1.5 Front Cover

3.1.5.1 Preparation for Removing the Front Cover
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-3)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-2)Reference[Removing the Right
Cover]
3.1.5.2 Removing the Front Cover
LBP3100 / LBP3010B
1) Release the 2 hooks in the arrow [A] direction.
2) While releasing the 4 hooks [2] in the arrow [B] direction, remove the

front cover [3].

3-6
[1]
[3]
[2]
[4]
[1]
Points to note at installation
Make sure that the switch arm [1] does not contact with the edge of the plate
[2] when attaching the cover.
3.1.5.3 Before Remove the Front Cover
0019-2203
LBP6000 / LBP6000B
1) Remove the Upper Cover. (page 3-5)Reference[Removing the Upper
Cover]
2) Remove the Left Cover. (page 3-3)Reference[Removing the Left Cov-
er]
3) Remove the Right Cover. (page 3-2)Reference[Removing the Right
Cover]
3.1.5.4 Removing the Front Cover
LBP6000 / LBP6000B
0019-2204
MEMO:
The following shows the 4 hooks [1] and 4 hook holes [2] of the Front
Cover.
[B]
[2] [3]
[A]
[1]
F-3-12
[1]
[A]
[2]
0025-1212
0025-1213