Before Removing The Drive Belt; Removing The Drive Belt - Canon LBP6000 Series Service Manual

Chapter 3
4) Remove the drive belt [1].
Points to note at installation
- When assembling the drive gears, follow the order as below.
[2] [1]
[5]
[1] Primary speed down pulley
[2] Timing belt
[3] Fixing ratchet gear
[4] Fixing gear
[5] Cartridge gear
[6] Coupling gear
[7] Delivery speed down W gear
[8] Compression spring
[9] Compression spring
- When attaching the drive gear, align the 7 shaft holes [1] with the drive
cover [2].
3-10
[1]
[1]
F-3-22
[1]
F-3-23
[4] [3]
[8]
[6]
[9]
[7]
[1]
[1]

3.1.8.3 Before Removing the Drive Belt

LBP6000 / LBP6000B
1) Remove the Upper Cover. (page 3-5)Reference[Removing the Upper
Cover]
2) Remove the Left Cover. (page 3-3)Reference[Removing the Left Cov-
er]
3) Remove the Right Cover. (page 3-2)Reference[Removing the Right
Cover]
4) Remove the Front Cover. (page 3-6)Reference[Removing the Front
Cover]

3.1.8.4 Removing the Drive Belt

LBP6000 / LBP6000B
1) Remove the Tension Unit [1].
- 1 Screw [2]
2) Remove the Drive Cover [1].
- 4 Screws [2]
Points to Note at Removing
When removing the 4 screws [1], be sure to hold the Drive Cover [2] by
hand.(Otherwise, the 2 springs [3] inside the Drive Cover may be lost.)
[2]
[1] [2]
F-3-24
0025-1218
0025-1220