Fluke 6270A Operator's Manual page 32

6270A
Operators Manual
Tab
CPS
Isolation Valve
Menu
Uncertainty
Menu
About this
Instrument
Restore Factory
Default
26
Table 6. Remote Port Menu (cont.)
Use this tab to choose if a Contamination Prevention System (CPS) is installed.
See Contamination Prevention Accessory (CPS) for more information.
Use this menu to verify whether an isolation valve is installed on the Primary,
Auxiliary 1, or Auxiliary 2 port.
Use this menu to view or change uncertainty parameters. Editable parameters are:
•
Head Height Uncertainty
•
Include Control Uncertainty
•
Additional Uncertainty Component 1
•
Additional Uncertainty Component 2
•
Show Uncertainty
•
See the Tech Note Guide to Determining Pressure Measurement Uncertainty
for 6270A Pressure Controller/Calibrator Pressure Modules located at
http://www.Flukecal.com.
This page of the menu is for information purposes only. It is useful information for
the user and any technician that might work on the Product. The information on the
page includes:
•
Model Number
•
Serial Number
•
Revision (of the Firmware)
•
User Interface
To restore the Product to factory settings, touch this tab and then OK.
Description