Switching The Ventilation System On And Off - Siemens EX875LX34E Instruction Manual

Operating the appliance
en
Selecting a hotplate and heat setting
The hob must be switched on.
Touch the and
" Ä
1.
hotplate.
The indicator gets brighter.
‹
Swipe your finger over the relative settings area until
2.
the required heat setting lights up.
The heat setting is set.
Changing the power level
Select the hotplate and set the desired power level in
the programming zone.
Switch off the hotplate
Select the hotplate and set it to
panel. The hotplate turns off and the residual heat
indicator appears.
Notes
If no pan has been placed on the hotplate, the
■
selected power level flashes. After a certain time has
elapsed, the hotplate switches off.
If a pan has been placed on the hotplate before
■
switching on the hob, it will be detected within
20 seconds of pressing the main switch and the
hotplate will be selected automatically. Once
detected, select the power level within the next
20 seconds or the hotplate will switch off.

Switching the ventilation system on and off

Always adjust the setting according to the current
Note:
conditions. To eliminate strong cooking smells, select a
high fan setting.
If no metal grease filter is available, the ventilation
Note:
system cannot be switched on. Insert the metal grease
filter. The hob functions are also available if there is no
metal grease filter.~ "Cleaning" on page 41
Do not obstruct the ventilation openings. Do not
Note:
place objects on the filter cover, as this will reduce the
power of the ventilation system.
When you switch on the ventilation system, the
Note:
right-hand settings area is no longer available. You can
change the fan setting for the ventilation system in the
left-hand settings area.
16
symbols for the required
in the programming
‹
Switching on the ventilation system
If the I and o
Note:
the metal grease filter correctly.
The and symbols are available. The ventilation
I o
system can be switched on.
Touch the symbol.
I
1.
The ventilation system starts at fan setting
setting that is selected will be shown on the display
panel and in the left-hand settings area. The right-
hand settings area is not available.
Notes
– Heat settings cannot be changed while the
ventilation system setting is being applied.
– During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
settings area can then be used for selecting the
heat settings again.
Select the required setting from the settings area.
2.
The setting that is selected will be displayed in the
left-hand settings area.
Selecting the fan setting
Touch the symbol.
I
1.
The ventilation system starts at fan setting
setting that is selected will be displayed in the left-
hand settings area. The right-hand settings area is
not available.
Select the required setting from the left-hand settings
2.
area.
The setting that is selected will be displayed in the
left-hand settings area.
Switching off the ventilation system
If you want to switch off the appliance, touch the
symbol. If you only want to switch off the ventilation
#
system, proceed as follows:
Touch the symbol.
I
1.
Select the symbol in the settings area.
‹
2.
Touch the symbol to switch to the setting area for
I
3.
the hob.
The run-on will start once the appliance has been
Note:
switched off (depending on the basic settings selected).
symbols are not available, insert
ƒ
ƒ
. The
. The