Download Print this page

Scroll Function; Residual Heat Indicator; Setting The Cooktop; Switching The Cooktop On And Off - Siemens EH8..KU1 SERIES Instruction Manual

Full surface induction cooktop
Hide thumbs

Advertisement

Scroll function

With the scroll function, you can change different adjustment
values such as power levels, cooking duration and time, as well
as other values in the Options menu.
First select the value you wish to adjust. Then touch the display
area and slide your finger up or down.



[



Setting the cooktop

This section informs you how to set the cooking positions. The
settings table shows power levels and cooking times for
various meals.

Switching the cooktop on and off

Use the main switch to switch the cooktop on and off.
To switch on: touch the
#
main switch lights up. After a short activation time, the cooktop
is ready for operation.
To switch off: touch the
#
switches off. All cooking positions are switched off. Hibernate
mode is activated. See section Hibernate mode.
The heat indicator remains lit until the cooking positions have
cooled down sufficiently.
Note: The cooktop switches off automatically if all cooking
positions have been switched off for more than 60 seconds
and you do not make any settings on the touch display.

Hibernate mode

As soon as you switch off the hob, Hibernate mode is activated
for a set duration. The lamp above the main switch flashes.
Only after this duration has passed does the hob switch off
completely. During Hibernate mode, you can switch the
appliance on again using the main switch. The appliance is
immediately ready for use.
Note: To find out how to change the duration of the Hibernate
mode, see section Options menu.

Setting a cooking position

Use the scroll function to set the desired power level.
Power level 1.0
= Lowest power
Power level 9.0
= Highest power
Each power level has an intermediate level. This is identified
with x.5.
Note: To find out how to deactivate the intermediate levels, see
section Options menu.
8
symbol. The indicator above the
symbol. The indicator in the display

Residual heat indicator

The hob has a residual heat indicator which shows whether the
cooking surface is still hot or warm. Do not touch the cooking
surface with this indicator. Even if the hob is already off, the
display will stay lit for as long as the cooking surface is still hot.
Setting the power level
The cooktop must be switched on.
Place cookware on the cooking surface.
1.
Touch the
symbol of the cooking position in the display.
#
2.
0.0 lights up in the display.
In the next 4 seconds, slide your finger up and set the
3.
desired power level.



[


Switching off the cooking position
Slide your finger down until 0.0 appears. The cooking position
switches off and appears as a detected cooking position after
approx. 4 seconds.


[



Advertisement

loading

This manual is also suitable for:

Ku1Eh8