Preparing And Maintaining The Wireless Temperature Sensor - Siemens EX875LX34E Instruction Manual

Frozen products
Function for frying with a large amount of oil
Frozen chips***
* Turn several times.
** Add liquid according to the manufacturer's instructions.
*** Heat the oil with the lid on. Fry in portions with the lid off (see table for cooking time per portion).
Miscellaneous
Function for frying with a small amount of oil
Camembert/cheese
Dried instant meals to which water is added, e.g. pasta dishes
Croutons
Almonds/hazelnuts/walnuts/pine nuts
Heating/keep-warm function
Food in jars and tins, e.g. goulash soup*
Mulled wine**
Poaching function
Milk**
* Add the food right at the beginning and stir regularly.
** Add the food right at the beginning.
Preparing and maintaining the wireless
temperature sensor
In this section, you will find the following information:
s e n s o r e l e s s t e m p e r a t u r e n t a i n i n g t h e w i r P r e p a r i n g a n d m a i
Adhering the silicone patch
■
Using the wireless temperature sensor
■
Cleaning
■
Changing the battery
■
You can obtain a temperature sensor and silicone
patches from specialist retailers or through our
technical after-sales service. Always quote the relevant
reference number.
00577921 Set of 5 silicone patches
HZ39050 Temperature sensor and set of 5 silicone patches
Adhering the silicone patch
The silicone patch attaches the temperature sensor to
the cookware.
A silicone patch must be adhered when using a
saucepan with the cooking functions for the first time.
Proceed as follows:
The adhesion point on the saucepan must be free of
1.
grease. Clean the saucepan, dry it thoroughly and
wipe the adhesion point with a degreasing agent
such as spirit.
Cooking assistance
functions
Cooking functions
Cooking assistance Temperature
functions setting
Frying sensor 3
Frying sensor 1
Frying sensor 3
Frying sensor 4
Cooking functions 1 / 70 ºC
Cooking functions 1 / 70 ºC
Cooking functions 2 / 90 ºC
Remove the protective film from the silicone patch.
2.
Adhere the silicone patch to the saucepan in the
correct place using the the enclosed template as a
guide.
Press the silicone patch down, including its inside
3.
surface.
The adhesive requires 1 hour to fully harden. The
cookware must not be used or cleaned during this time.
Notes
Cookware with the silicone patch must not be left to
■
soak for long periods in soapy water.
If the silicone patch comes off, attach a new one.
■
Cooking assist functions
Temperature Total cooking time
setting from signal tone
(mins)
5 / 170 ºC 4 - 8
Total cooking time
from signal tone
(mins)
7 - 10
5 - 10
6 - 10
3 - 15
10 - 20
-
-
en
35