Related Manuals for Siemens EH6 MK2 Series
Summary of Contents for Siemens EH6 MK2 Series
- Page 1 EH6..MK2.., EH6..MD2.., EH7..MD2.., EH9..MD2.. [en] Instruction manual .............. 3 9000308527 *9000308527* EURO Appliances - euappliances.info...
- Page 2 (+0. (+0' ‘ ‘ ‘ ‘ ‘ ‘ (+0' (+ 0' ‘ ‘ ‘ ‘ ‘ ‘ ‘ ‘ Ø = cm EURO Appliances - euappliances.info...
-
Page 3: Table Of Contents
Normal noise while the appliance is working ......15 Programming ..................9 After-sales service..............15 Table....................10 Frying programs................11 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www.siemens-home.com and in the online shop www.siemens-eshop.com EURO Appliances - euappliances.info... -
Page 4: Safety Warnings And Advice
ã=Safety warnings and advice Please read these instructions carefully. We advise you not to The hotplate heats up, but the display does not work use the appliance until you have read them. Risk of burns!! Keep the operation and installation instructions. If the appliance Turn off the hotplate if the indicator does not work. -
Page 5: Protecting The Environment
Overview The following table presents the most common damage caused: Damage Cause Measure Stains Food spillage Immediately remove spilt food using a glass scraper. Unsuitable cleaning products Only use cleaning products specifically designed for glass-ceramic hobs. Scratches Salt, sugar and sand Do not use the hob as a tray or working surface. -
Page 6: Familiarise Yourself With The Appliance
pan and switch the hotplate off. If it fails to work after it has Absence of pan or unsuitable size cooled down, please contact the Technical Assistance Service. If no pan is placed on the selected hotplate, or if it is made of unsuitable material or is not the correct size, the power level Pan detection displayed on the hotplate indicator will flash. -
Page 7: Residual Heat Indicator
Residual heat indicator Even when switched off, the light will remain on as long as the hotplate remains hot. The hob has a residual heat indicator for each hotplate to show If the pan is removed before the hotplate is turned off the / those which are still hot. - Page 8 Ongoing cooking Ongoing cooking time setting in minutes Slow cooking, simmering Potato pancakes 4 -5* 20-30 min Fish 4 -5* 10-15 min White sauces (e.g., bechamel) 3-6 min Whipped sauces (e.g., Bearnaise, Hollandaise) 8-12 min Boiling, steaming, roasting Rice (with a double amount of water) 15-30 min Rice pudding 25-35 min...
-
Page 9: Deep-Frying Function
Deep-frying function This function is used for deep-frying, automatically regulating Notes the temperature of the pan. Never leave oil or fat cooking unattended. The hotplates equipped with this function are on the right side Place the pan at the centre of the hotplate. Ensure that the or front hotplates, depending on the model (see figure). -
Page 10: Table
Table The table shows which temperature setting is suitable for each The heat setting selected depends on the type of pan used. type of food. The cooking time may vary according to the type, weight, thickness and quality of the food. Temperature Total cooking time after setting... -
Page 11: Frying Programs
Frying programs Selecting the desired program Select the hotplate: These programmes should only be used with pans recommended for the frying function. Press the symbol. lights up in the hotplate display. The following food can be prepared using these programmes: lights up in the time program function display. -
Page 12: Time Programming Function
Time programming function This function may be used in two different ways: Automatically switch off a hotplate with the deep-frying function to automatically switch off a hotplate. When cooking using the deep-frying function, the programmed as a timer. cooking time begins to count down once the selected hotplate reaches the desired temperature. -
Page 13: Automatic Time Limitation
Automatic time limitation If the hotplate remains in use for a long time and no changes The hotplate stops heating. On the hotplate display, are made in the settings, the automatic time limitation function flash alternately. is triggered. The indicator goes out when any symbol is pressed. The hotplate can now be reset. -
Page 14: To Access The Basic Settings
To access the basic settings Press the symbol several times until the indicator for the desired function appears on the left of the screen. The hob must be turned off. Then select the required setting using the programming zone. Turn on the hob with the main switch. Within the next 10 seconds, press the symbol and hold for 4 seconds. -
Page 15: Normal Noise While The Appliance Is Working
Indicator Malfunction Measure The control panel is wet or an object is Dry the control panel area or remove the object. flashing resting on it. Electronic system malfunction. Disconnect the hob from the mains. Wait 30 seconds or so, then + number / connect it again.* + number /... - Page 16 Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München (901013) DEUTSCHLAND EURO Appliances - euappliances.info...