Data Logged Value
The data logged value is the next message.
•
The first line indicates the date and time.
•
The second line shows the:
• point
• gas type and
• logged concentration.
•
The message is generated for every point and sent every 15
minutes or hourly, depending on the setup selection.
•
The concentration is an average or the maximum values for the
selected time frame; see TABLE C-3.
Alarm Events
Alarm events is the last message type.
•
The first line is the date and time.
•
The second name is the:
• point
• gas name and
• alarm level.
•
See TABLE C-4.
All of these messages are initiated by the sync character, followed by a
binary address byte, 40 ASCII characters, and terminated with a line
feed and carriage return.
C-3