Beacon; End Of Sample Line Filters; General Description; The Chillgard Rt Unit - MSA Chillgard RT Instruction Manual

Beacon

The optional beacon is mounted on top of the unit (FIGURE 1-5). It is
powered by the monitor's internal DC voltage.

End of Sample Line Filters

End of sample line filters are required for proper unit operation; they
may be included in the shipping carton.
If the end of sample line filters are not included, they must be
purchased. Place an end-of-sample line filter (P/N 711561).
Figure 1-5. Chillgard RT Monitor with Optional Beacon

General Description

The Chillgard RT Unit:

• Monitors refrigerant gases up to 1000 parts-per-million (ppm)
• Operates on the photo-acoustic principle, allowing refrigerant gas
concentration measurement in a complex mixture of background
gases
1-6