Location Of The Monitor; Instrument Location Guidelines; Warning - MSA Chillgard RT Instruction Manual

Figure 2-1. Front Door Latches

Location of the Monitor

This unit must not be located in areas that may contain a
flammable mixture of gas and air; otherwise, an explosion
may occur.
The monitor performance is dependent on its location and sensing pick-
up location(s). Follow the guidelines listed below before mounting the
monitor.

Instrument Location Guidelines

1. Select a location where personnel will see the front panel or the
optional beacon before they enter the equipment room or the area
where the monitoring point is located.
2. Mount the unit vertically; do not mount the unit to structures subject
to vibration and shock, such as piping and piping supports.
3. Do not locate the unit near an excessive heat source or in wet and
damp locations.
2-2

WARNING