Data Logging - MSA ALTAIR 4 Operating Manual

OPERATION
3.4.4 Setup Time and Date
This submenu is for setting date and time.
For more information see the flow charts in Section 7.9.
Figure 3-5 Date and Time Setup
(1) To bypass this setup, press the [
as follows.
(2) Press the [ ] button to enter the submenu.
(3) Set month by pressing the [
(4) Press the [ ] button to confirm month.
(5) Repeat this procedure for day, year, hours and minutes.
• By default, time is displayed in 12-hour format.
• The
EXIT
(6) Confirming this screen with the [
• If the sensors have not warmed up yet, the countdown is displayed.
• The instrument then goes to Measuring mode.
3.5

Data Logging

Connecting Instrument to PC
(1) Switch ON the ALTAIR 4 and align the Datalink Communication port
on the ALTAIR 4 to the IR interface of the PC.
(2) Use the MSA Link software to communicate with the instrument.
See MSA Link documentation for detailed instructions.
34
] or [
] button or the [
screen will be displayed next.
] button exits the instrument setup.
ALTAIR 4 - Operating Manual
MSA
] button; otherwise, continue
] button.