Using The Accessories - AEG BSE882320M User Manual

Clock function
1) Maximum 23 h 59 min

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Food Sensor
Food Sensor measures temperature
inside the food. When the food is at the
set temperature, the appliance
deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the accessory
supplied and the original
replacement parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• The Food Sensor cannot be used for
liquid dishes.
• During cooking the Food Sensor must
remain in the dish and the plug in the
socket.
Duration
End Time
Reminder
Application
To set the length of an operation.
To set the switch-off time for a heating func-
tion. This option is available only when the
Duration is set. You can use the functions Du-
ration and End Time at the same time to au-
tomatically turns on and off the appliance on
1)
a given time later.
1)
To set a countdown.
This function has no effect on the operation
of the appliance.
Choose and set the time. When the time
ends, an acoustic signal sounds. Press the ro-
tary knob to stop the signal.
The Reminder can be also used when the ap-
pliance is turned off.
• Use recommended food core
temperature settings.
WARNING!
Refer to "Hints and tips"
chapter.
The appliance calculates an
approximate end of cooking
time. It depends on the
quantity of food, the set
oven function and
temperature.
Food categories: meat, poultry
and fish
1. Activate the appliance.
2. Insert the tip of the Food Sensor into
the centre of meat or fish, in the
thickest part if possible. Make sure
that at least 3/4 of the Food Sensor is
inside of the dish.
3. Put the plug of the Food Sensor into
the socket at the front of the
appliance.
ENGLISH 19
1)