Energy Efficiency - AEG BSE882320M User Manual

Problem
There is no good perform-
ance of the cleaning proce-
dure.
There is no good perform-
ance of the cleaning proce-
dure.
There is no good perform-
ance of the cleaning proce-
dure.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. ENERGY EFFICIENCY

13.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conven-
tional mode
Possible cause
The initial oven cavity tem-
perature of the steam clean-
ing function was too high.
You did not remove the side
grids before the start of the
cleaning procedure. They
can transfer heat to the walls
and decrease the perform-
ance.
You did not remove the ac-
cessories from the appliance
before the start of the clean-
ing procedure. They can
compromise the steam cycle
and decrease the perform-
ance.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
Repeat the cycle. Run the cy-
cle when the appliance is
cold.
Remove the side grids from
the appliance and repeat the
function.
Remove the accessories
from the appliance and re-
peat the function.
AEG
BSE882320M
BSK882320M
81.0
A+
1.09 kWh/cycle
ENGLISH 51