Internal Analyzer Examples
Introduction
This chapter shows you how to use the emulation analyzer from within
the PC Interface. It shows you how to make simple measurements as
well as how to search for a sequence of states.
This chapter describes:
The sample program on which example measurements are
made.
This chapter provides the following examples of using the analyzer:
Specifying a simple trigger.
Using storage qualifiers.
Using trace prestore.
Changing the count qualifier.
Trace a sequence of events using global restart.
Trace a sequence of events while specifying "else" branches
per level.
Storing a "window" of program execution.
Using multiple trigger levels.
3
Examples 3-1