Table of Contents
Advertisement
3-28 Examples
pgpbssAGAIN
and press Enter. Continue typing:
pgpmdbRESULTS..RESULTS+0ffh
and press Enter. Terminate the kestroke macro by pressing ESC.
Before executing the F3 keystroke macro, define breakpoints at
QSORT and AGAIN by selecting:
Breakpoints, Add
Type in "QSORT;AGAIN" into the breakpoint addresses field, and
press Enter. When you add breakpoints, they are also set. Because
breakpoints should be cleared when you execute the keystroke macro,
select:
Breakpoints, Clear, All
Now, execute the keystroke macro by pressing F3, and press CTRL-Z
to zoom the emulation memory display window.
Look carefully at the last several bytes of the RESULTS area. You may
notice that a byte is out of order. If not, press F3 and look at the
Advertisement
Table of Contents
