Table of Contents
Advertisement
Introducing the HP 64700 Series Analyzer
Overview
This manual describes the HP 64700 Series analyzer. Each HP 64700
Series emulator contains an internal emulation analyzer. Some
emulators may optionally contain an external analyzer.
The emulation analyzer, also known as the internal analyzer, captures
emulator bus cycle information synchronously with the processor's
clock signal. A trace is a collection of these captured states. The
trigger state specifies when the trace measurement is taken. The
external analyzer captures activity on signals external to the emulator,
typically other target system signals.
The analyzer commands are the same in every emulator; consequently,
this manual is shipped with every HP 64700 Series emulator ordered
with the PC Interface. A block diagram of the analyzer is shown in
figure 1-1.
1
Introduction 1-1
Advertisement
Table of Contents
