Table of Contents
Advertisement
One of the sequence levels is specified as the trigger level. The
analyzer triggers when it finds the state associated with this level. The
trigger is the reference point in the resulting trace. States are stored
before, after, or about the trigger state. The trigger state is always on
line 0 of the trace.
Sequence Level Field
The sequence level field shows the level (1 through 8) of the sequence
term. This field also allows you to insert or delete sequence terms, or
to specify the trigger level.
Move the cursor to the first sequence level field in the upper left corner
of the screen, and use the Tab key to view the options associated with
sequence levels. These options are:
I
D
T
Select the "I" option and enter Enter to insert a new sequence level.
Using the arrow cursor keys, reposition the cursor and repeat this
process until eight sequence levels are used. This is the maximum
number of sequence levels.
When moving the cursor in the trace specification screen, use the arrow
Note
cursor keys. Using Enter (carriage return) in the state qualification
fields causes the "patterns and expressions" screen to appear.
Move the cursor to level 5 and make this the trigger level by entering
"T" and a Enter. Notice that level 5 now shows "Trigger on" instead
of "Then find" while the previous trigger level now shows "Then find".
Move the cursor to the last sequence level and enter "D" and Enter.
Notice that the previous level is deleted instead.
Insert level.
Delete level.
Set the trigger level.
Using the Analyzer 2-3
Advertisement
Table of Contents
