Setting Charge/Discharge Profile + Backup Power - SolarEdge storedge Installation Manual

Setting Charge/Discharge Profile + Backup Power

For backup power + Smart Energy Management - according to user requirement
o
For backup-only - according to battery manufacturer recommendation, if provided.
o
Setting Charge/Discharge Profile + Backup Power
In this mode, you first set the system to charge/ discharge profile ( for time-of-use arbitrage) and the level
of charging the battery from AC. Then, you set up the level of stored energy to be reserved for backup.
To set up Charge/Discharge Profile (TOU) + Backup Power:
1. Access the Energy Ctrl. menu as described above.
2. Select Time of Use.The Energy Manager screen changes to display the following:
L i m i t
E n e r g y
S e t C a l e n d a r
S t o r a g e
3. From the Energy Manager menu select Set Calendar. The following screen is displayed, showing
options for calendar setting:
S e r v e r
L o a d
4. Do one of the following:
To load a time-of-use table from the monitoring platform, refer to
l
http://www.solaredge.us/sites/default/files/storedge_charge_discharge_profile_
programming.pdf .
To load a time-of-use table from the SolarEdge SD card (contact SolarEdge to
l
obtain it), insert the card to the slot labeled "Card" on the communication board
and select Load SD. From the displayed list select the directory and the table
(filename).
5. To set up the level of charging from AC, do the following:
a. Select Energy Manager è Storage Control.
b. Select AC Charge è Enable. A n additional menu is added to the StorEdge Control menu: AC
Charge Li<None>
A C
A C
B a c k u p
c. Select AC Charge Li è Limit Type, and set one of the following limits:
Set %PV to enter a limit as a percentage of year-to-date energy production.
l
Set kWh to enter a fixed annual energy limit.
l
Set None to unlimit the charging.
l
6. To set a minimum battery level used for backup, so that the battery will always have energy stored in
case backup power is needed, select Backup Rsvd and set the required level of reserved energy as
percentage of the battery capacity
For backup power + Smart Energy Management - according to user requirement
o
For backup-only - according to battery manufacturer recommendation, if provided.
o
84
C o n t r o l < D i s >
C t r l < T O U >
C o n t r o l
S y n c < D i s >
S D < N / A >
C h a r g e < E N >
C h a r g e L i < N o n e >
R s v d < N / A >
SolarEdge StorEdge Installation Guide MAN-01-000262-1.2