Chapter 2: Installing the Power Optimizers
Safety
The following notes and warnings apply when installing the SolarEdge power optimizers. Some of the
following may not be applicable to smart modules:
WARNING!
The metallic enclosure of the power optimizer must be grounded in accordance with the requirements of
the local and national codes.
L'enceinte métallique de l'optimiseur de puissance doit être mise à la terre en accord avec les
régulations locales et nationales.
WARNING!
When modifying an existing installation, turn OFF the inverter ON/OFF switch, the StorEdge
Connection Unit and the AC circuit breaker on the main AC distribution panel.
Avant de faire ces étapes, éteignez l'onduleur monophasé en mettant sur OFF l'interrupteur ON/OFF
situé au bas de l'onduleur.
WARNING!
Input and output connectors are not watertight until mated. Open connectors should be mated to each
other or plugged with appropriate watertight caps.
Les connecteurs d'entrée et sortie ne sont pas étanches jusqu'à ce qu'ils soient accouplés. Les
connecteurs doivent être accouplés ou fermés avec des terminaux étanches.
SolarEdge-StorEdge Installation Guide MAN-01-00262-1.2
Chapter 2: Installing the Power Optimizers
13