About this Guide
The following table summarizes the SolarEdge products required for the StorEdge applications:
Product
Single Phase StorEdge
inverter
Auto-transformer
SolarEdge Electricity Meter
Battery
NOTE
Additional SolarEdge inverters (without batteries) can be connected with RS485. The inverters will
l
participate in export limitation and Smart Energy Management.
Connecting multiple inverters with RS485 master-slave connection may require an RS485
Expansion Kit (available from SolarEdge).
PV modules connected to power optimizers are not mandatory for charge/discharge profile
l
programming and for backup power.
About this Guide
This document describes basic system connection and configuration - PV system (power
optimizer strings), one inverter, one battery, backed-up loads panel and one meter.
For additional configuration options refer to the StorEdge Solution Applications -
Connection and Configuration Guide, available at
http://www.solaredge.com/sites/default/files/storedge_backup_applications_
connection_and_configuration_guide.pdf.
10
Grid-tied Solar
Backup Power
Smart Energy Management
ü
ü
ü
ü
SolarEdge StorEdge Installation Guide MAN-01-000262-1.2
Applications
Grid-tied Solar
Backup Power
Smart Energy Management
ü
ü
Optional
ü
Grid-tied Solar
ü
X
ü
ü