Connecting Communication To The Meter - SolarEdge storedge Installation Manual

Connecting Communication to the Meter

Connecting Communication to the Meter
If a meter was installed, connect it to the StorEdge Connection Unit as described in the following table.
For detailed information refer to the installation guide supplied with the meter.
Recommended cable type
(min-max AWG)
RS485 24 AWG (16-24 AWG),
shielded twisted pair, 600V
insulated
Connect as illustrated below:
40
StorEdge Connection
Unit
Ext. Devices 7-pin terminal
block: B, A, G
Figure 24: Connection to a meter
SolarEdge StorEdge Installation Guide MAN-01-000262-1.2
Meter connection
RS485 4-pin terminal block: B, A, G