WLAN card
Removing wireless card
1
Remove the:
a
USB dongle-bay cover
b
back cover
c
system-board shield
2
Remove the antenna cables from the securing clip [1].
3
Remove the two screws (M2X2.5) that secure the wireless-card shield to the system board [2].
4
Lift the wireless-card shield off the system board [3].
5
Remove the screw (M2X2.5) that secures the wireless-card bracket and the wireless card to the system board [4].
6
Lift the wireless-card bracket off the wireless card [5].
7
Disconnect the antenna cables from the wireless card [6].
8
Slide and remove the wireless card out of the wireless-card slot [7].
26
Removing and installing components