2
Install the:
a
Heat sink
b
System fan
c
2.5–inch hard drive assembly
d
Side cover
3
Follow the procedure in
WLAN card
Removing the WLAN card
1
Follow the procedure in
2
Remove the:
a
Side cover
b
2.5 inch hard drive assembly
3
To remove the WLAN card:
a
Remove the single (M2X3.5) screw that secures the plastic tab to the WLAN card [1].
b Remove the plastic tab to access the WLAN antenna cables [2].
c
Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
d Lift the WLAN card from the connector on the system board [4].
28
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.