Installing inner frame
1
Align the screw holes on the inner frame with the screw holes on the middle frame.
2
Replace 20 screws (M3X4) that secure the inner frame to the middle frame.
3
Install the:
a
stand
b
back cover
c
USB dongle-bay cover
4
Follow the procedure in
Built-in self test button
Removing built-in self test button
1
Follow the procedure in
2
Remove the:
a
USB dongle-bay cover
b
back cover
c
stand
d
inner frame
3
Remove the power-button cable from the routing guide on the power-button board shield [1].
34
Removing and installing components
After working inside your computer
Before working inside your
computer.