Installing Stand; System Fan; Removing System Fan - Dell Precision 5720 Owner's Manual

Installing stand

1 Align the screw holes on the stand with the screw holes on the middle frame.
2 Replace the six screws (M4X6) that secure the stand to the middle frame.
3 Install the:
a back cover
b USB dongle-bay cover
4 Follow the procedure in

System fan

Removing system fan

1 Follow the procedure in
2 Remove the:
a USB dongle-bay cover
b back cover
c stand
d system-board shield
3 Remove the power-supply unit cable from the routing guides on the system fan [1].
4 Disconnect the power-supply unit cable from its connector on the system board [2]..
28 Removing and installing components
After working inside your computer
Before working inside your computer.