Wireless Card; Removing The Wlan Card - Dell OptiPlex Tower 7010 Owner's Manual

Steps
1. Align the notch on the M.2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the M.2280 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the M.2280 solid-state drive to the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Wireless card

Removing the WLAN card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.
After working inside your
before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs) 55