System board
Removing system board
NOTE:
To avoid any potential damage to the cables, ensure to release them from the routing guides.
1
Follow the procedure in
2
Remove the:
a
USB dongle-bay cover
b
back cover
c
memory modules
d
stand
e
system fan
f
inner frame
g
system-board shield.
h
I/O panel
i
processor heat-sink
j
processor.
k
coin-cell battery
l
memory fan
m
wireless card
n
solid-state drive.
3
Using the pull tab, disconnect the display cable from the system board [3].
4
Disconnect the camera cable from the system board [2].
5
Using the pull tab, disconnect the USB-connection cable from the system board [3].
6
Disconnect the hard-drive power cable from the system board. [4]
7
Disconnect the hard-drive data cables from the system board [5].
56
Removing and installing components
Before working inside your
computer.