Installing power supply unit
1
Align the screw holes on the power-supply unit with the screw holes on the middle cover.
2
Replace the five screws (M3X4) that secure the power-supply unit to the middle cover.
3
Route the cables through the guide and close the clip to secure the cables.
4
Connect the power-supply indicator cable and power-supply fan cable to their respective connectors.
5
Route the power-supply unit cable through the routing guides on system fan.
6
Connect the power-supply unit cable to its connector on the system board.
7
Install the:
a
back cover
b
USB dongle-bay cover
c
stand
8
Follow the procedure in
32
Removing and installing components
After working inside your computer