Back cover
Removing back cover
1
Follow the procedure in
2
Remove
USB dongle-bay
3
Loosen two captive screws that secure the back cover to the inner frame [1].
4
Push the stand down [2].
5
Slide the back cover towards the top of the computer and lift the back cover off the inner frame [3].
Installing back cover
1
Align the tabs on the back cover with the slots on the inner frame.
2
Slide the back cover towards the bottom of the computer and snap the back cover in place.
3
Tighten the two captive screws that secure the back cover to the inner frame.
4
Install the
USB dongle-bay
5
Follow the procedure in
14
Removing and installing components
Before working inside your
cover.
cover.
After working inside your
computer.
computer.