Installing media card reader
1
Connect the audio cable to the media card.
2
Connect the media-card reader cable to the media-card.
3
Align the media-card reader to the slot on the middle frame.
4
Align the screw hole on the media-card reader shield to the screw hole on the middle frame.
5
Replace the two screws (M2X3) that secure the media-card reader shield to the middle frame.
6
Install the:
a
speakers.
b
inner frame
c
stand
d
back cover
e
USB dongle-bay cover
7
Follow the procedure in
Camera
Removing camera
1
Follow the procedure in
2
Remove the:
a
USB dongle-bay cover
b
back cover
c
stand
d
inner frame
e
speakers
3
Remove the two screws (M2X3) that secure the camera assembly to the middle frame [1].
4
Remove the camera cable from the routing guide on the middle frame [2].
5
Lift the metal foil and turn the camera assembly over [3].
6
Unrote the cable from the clip and disconnect the camera cable from the camera assembly [4]
54
Removing and installing components
After working inside your computer
Before working inside your
computer.