Installing memory module
1
Align the notch on the memory module with the tab on the memory-module slot.
2
Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
3
Install the:
a
back cover
b
USB dongle-bay cover
4
Follow the procedure in
Hard drive
Removing HDD/SSD
NOTE:
The drive in the top slot of the drive carrier is the primary drive. The procedure for removing both primary and secondary
drive is the same.
1
Follow the procedure in
2
Remove the:
16
Removing and installing components
After working inside your computer
Before working inside your
computer.